Trending ▼  

GATE 2014 : Architecture and Planning

12 pages, 65 questions, 65 questions with responses, 105 total responses
gate
  
+Fave Message
 Home > gate >   F Also featured on: preetheiva

Formatting page ...
 

GATE 2014 Examination AR: Architecture & Planning Duration: 180 minutes Maximum Marks: 100 Read the following instructions carefully. 1. To login, enter your Registration Number and password provided to you. Kindly go through the various symbols used in the test and understand their meaning before you start the examination. 2. Once you login and after the start of the examination, you can view all the questions in the question paper, by clicking on the View All Questions button in the screen. 3. This question paper consists of 2 sections, General Aptitude (GA) for 15 marks and the subject specific GATE paper for 85 marks. Both these sections are compulsory. The GA section consists of 10 questions. Question numbers 1 to 5 are of 1-mark each, while question numbers 6 to 10 are of 2-mark each. The subject specific GATE paper section consists of 55 questions, out of which question numbers 1 to 25 are of 1-mark each, while question numbers 26 to 55 are of 2-mark each. 4. Depending upon the GATE paper, there may be useful common data that may be required for answering the questions. If the paper has such useful data, the same can be viewed by clicking on the Useful Common Data button that appears at the top, right hand side of the screen. 5. The computer allotted to you at the examination center runs specialized software that permits only one answer to be selected for multiple-choice questions using a mouse and to enter a suitable number for the numerical answer type questions using the virtual keyboard and mouse. 6. Your answers shall be updated and saved on a server periodically and also at the end of the examination. The examination will stop automatically at the end of 180 minutes. 7. In each paper a candidate can answer a total of 65 questions carrying 100 marks. 8. The question paper may consist of questions of multiple choice type (MCQ) and numerical answer type. 9. Multiple choice type questions will have four choices against A, B, C, D, out of which only ONE is the correct answer. The candidate has to choose the correct answer by clicking on the bubble ( ) placed before the choice. 10. For numerical answer type questions, each question will have a numerical answer and there will not be any choices. For these questions, the answer should be enteredby using the virtual keyboard that appears on the monitor and the mouse. 11. All questions that are not attempted will result in zero marks. However, wrong answers for multiple choice type questions (MCQ) will result in NEGATIVE marks. For all MCQ questions a wrong answer will result in deduction of marks for a 1-mark question and marks for a 2-mark question. 12. There is NO NEGATIVE MARKING for questions of NUMERICAL ANSWER TYPE. 13. Non-programmable type Calculator is allowed. Charts, graph sheets, and mathematical tables are NOT allowed in the Examination Hall. You must use the Scribble pad provided to you at the examination centre for all your rough work. The Scribble Pad has to be returned at the end of the examination. Declaration by the candidate: I have read and understood all the above instructions. I have also read and understood clearly the instructions given on the admit card and shall follow the same. I also understand that in case I am found to violate any of these instructions, my candidature is liable to be cancelled. I also confirm that at the start of the examination all the computer hardware allotted to me are in proper working condition .

Formatting page ...
 

GATE 2014 SET- 1 General Aptitude -GA Q. 1 Q. 5 carry one mark each. Q.1 A student is required to demonstrate a high level of comprehension of the subject, especially in the social sciences. The word closest in meaning to comprehension is (A) understanding Q.2 (B) meaning (C) concentration (D) stability Choose the most appropriate word from the options given below to complete the following sentence. One of his biggest ______ was his ability to forgive. Q.3 (B) virtues (C) choices (D) strength 20 14 (A) vice Rajan was not happy that Sajan decided to do the project on his own. On observing his unhappiness, Sajan explained to Rajan that he preferred to work independently. Which one of the statements below is logically valid and can be inferred from the above sentences? (A) Rajan has decided to work only in a group. (B) Rajan and Sajan were formed into a group against their wishes. (C) Sajan had decided to give in to Rajan s request to work with him. (D) Rajan had believed that Sajan and he would be working together. Q.4 If y = 5x2 + 3, then the tangent at x = 0, y = 3 (A) passes through x = 0, y = 0 (C) is parallel to the x-axis E A foundry has a fixed daily cost of Rs 50,000 whenever it operates and a variable cost of Rs 800Q, where Q is the daily production in tonnes. What is the cost of production in Rs per tonne for a daily production of 100 tonnes? G AT Q.5 (B) has a slope of +1 (D) has a slope of 1 Q. 6 Q. 10 carry two marks each. Q.6 Find the odd one in the following group: ALRVX, EPVZB, ITZDF, OYEIK (A) ALRVX Q.7 (C) ITZDF (D) OYEIK Anuj, Bhola, Chandan, Dilip, Eswar and Faisal live on different floors in a six-storeyed building (the ground floor is numbered 1, the floor above it 2, and so on). Anuj lives on an even-numbered floor. Bhola does not live on an odd numbered floor. Chandan does not live on any of the floors below Faisal s floor. Dilip does not live on floor number 2. Eswar does not live on a floor immediately above or immediately below Bhola. Faisal lives three floors above Dilip. Which of the following floor-person combinations is correct? (A) (B) (C) (D) GA (B) EPVZB Anuj 6 2 4 2 Bhola 2 6 2 4 Chandan 5 5 6 6 Dilip 1 1 3 1 Eswar 3 3 1 3 Faisal 4 4 5 5 1/2

Top Contributors
to this ResPaper
(answers/comments)


Vaishali Parmar

(41)

MEHUL PADHARIA

(11)

Eeswar Atluri

(7)

Shubham Sharma

(7)

Formatting page ...
 

GATE 2014 SET- 1 General Aptitude -GA Q.8 The smallest angle of a triangle is equal to two thirds of the smallest angle of a quadrilateral. The ratio between the angles of the quadrilateral is 3:4:5:6. The largest angle of the triangle is twice its smallest angle. What is the sum, in degrees, of the second largest angle of the triangle and the largest angle of the quadrilateral? Q.9 One percent of the people of country X are taller than 6 ft. Two percent of the people of country Y are taller than 6 ft. There are thrice as many people in country X as in country Y. Taking both countries together, what is the percentage of people taller than 6 ft? (A) 3.0 (C) 1.5 (D) 1.25 The monthly rainfall chart based on 50 years of rainfall in Agra is shown in the following figure. Which of the following are true? (k percentile is the value such that k percent of the data fall below that value) E 20 14 Q.10 (B) 2.5 G AT (i) On average, it rains more in July than in December (ii) Every year, the amount of rainfall in August is more than that in January (iii) July rainfall can be estimated with better confidence than February rainfall (iv) In August, there is at least 500 mm of rainfall (A) (i) and (ii) (C) (ii) and (iii) (B) (i) and (iii) (D) (iii) and (iv) END OF THE QUESTION PAPER GA 2/2

Formatting page ...
 

GATE 2014 ARCHITECTURE & PLANNING - AR Q. 1 Q. 25 carry one mark each. Q.1 Toothing is a construction technique used in (A) Wood construction (C) Reinforced cement concrete construction Q.2 (B) Steel construction (D) Brick masonry Skeleton and Skin concept in building design and construction evolved during the (A) Roman period (C) Gothic period (D) Greek period (A) 6.0 Q.4 (D) Arata Isozaki (C) Three directions (D) Four directions E (B) Two directions (C) Rem Koolhaas (B) Kisho Kurokawa (C) Tadao Ando (D) I M Pei (G In AutoCAD, the maximum number of points which can be snapped in a circle using OSNAP command is (A) 1 Q.8 (D) 8.0 Hiroshima Peace Memorial Museum in Japan has been designed by (A) Kenzo Tange Q.7 (B) Toyo Ito Hip roof is formed by surfaces sloping in (A) One direction Q.6 (C) 7.0 Pritzker Architecture Prize 2013 has been awarded to (A) Mario Botta Q.5 (B) 6.5 20 14 ) As per the IRC standards, the minimum width (in m) of a two lane urban carriageway without a raised kerb is AT Q.3 (B) Renaissance period (B) 3 (C) 4 (D) 5 Development authorities in India are established under the provision of (B) 74th Constitutional Amendment Act (C) Town and Country Planning Act (D) Land Acquisition Act AR (A) Municipal Act Q.9 In escalators, the angle of inclination with the horizontal plane should be in the range of (A) 10 20 Q.10 (C) 30 35 (D) 35 45 As per the Census of India 2011, Metropolitan Urban Agglomeration is a contiguous spread of several urban settlements where the minimum population size (in Lakh) is (A) One AR (B) 20 30 (B) Five (C) Ten (D) Fifty 1/9

Formatting page ...
 

GATE 2014 Q.11 ARCHITECTURE & PLANNING - AR BEES is an acronym for (A) Building for Environmental and Economic Sustainability (B) Built Environment and Ecological Society (C) Building for Energy and Environment Sustainability (D) Built Environment and Engineering Services Q.12 In a single-stack system of plumbing (A) All the appliances and traps are fully ventilated (C) Anti-siphonage pipes are omitted 20 14 ) (B) Only WC branches are connected with anti-siphonage pipes (D) Only the stack is vented above the branch connection at each floor level The maximum bending moment (kNm) in a simply supported beam of 8 m span subjected to a uniformly distributed load of 20 kN/m (inclusive of its self-weight) over the entire span is (A) 40 Q.14 (B) 160 (C) 30 - 40 AT (B) 20 - 30 (D) 40 - 50 As per the National Building Code, the minimum width (in m) of a staircase flight in an educational building above 24 m height should be (B) 1.5 (G (A) 1.0 Q.16 (D) 380 Criteria for background noise (in NC) in hospitals and apartments is (A) 10 - 20 Q.15 (C) 240 E Q.13 (C) 2.0 (D) 2.5 Among the following, the one that is NOT a land assembly technique is (B) Accommodation Reservation (C) Town Planning Scheme (D) Transfer of Development Right AR (A) Land Use Zoning Q.17 The Grand Gallery in Egyptian Architecture is provided only at (A) Great Pyramid Q.18 (B) Temple (C) Mastaba (D) Bent Pyramid In the Taipei 101 building, the steel sphere as TMD (Tuned Mass Damper) is suspended to reduce horizontal sway due to (A) Settlement & Wind Load (C) Seismic & Geothermal Load Q.19 (B) Wind & Geothermal Load (D) Seismic & Wind Load Finger Plan concept of urban planning was initially adopted in (A) Canberra (C) Copenhagen AR (B) Paris (D) Tokyo 2/9

Formatting page ...
 

GATE 2014 Q.20 ARCHITECTURE & PLANNING - AR The most important property of concrete in its fresh state is (A) Compressive strength (C) Elastic modulus Q.21 (B) Tensile strength (D) Workability An element constructed at intervals along the length of a wall to stabilize it against overturning is (A) Barrel Vault Q.22 (B) Pilaster (C) Squinch Arch (D) Buttress Landscape design of Shakti Sthal, the Samadhi of late Prime Minister Smt. Indira Gandhi, was done by architect (B) Mohammad Shaheer (C) Ravindra Bhan (D) Raj Rewal (A) Land Service House Occupant (C) Occupant Land Service House Q.23 20 14 ) (A) Ram Sharma (D) Land Occupant House Service Horizontally Wedge-shaped Treads in stairways are termed as (A) Stringers (D) Newel The sequence of development in a Site-and-Services scheme is (B) Occupant Land House Service Which of the following is NOT a classical spatial theory of land use planning? AT Q.25 (C) Scotia E Q.24 (B) Winders (B) Multiple Nuclei Theory (C) Centripetal Theory (D) Sector Theory AR (G (A) Concentric Zone theory AR 3/9

Formatting page ...
 

GATE 2014 ARCHITECTURE & PLANNING - AR Q. 26 Q. 55 carry two marks each. Q.26 A housing project is proposed to be designed in a plot of 2 hectare. Maximum permissible FAR is 2. The share of the numbers of dwelling units (DU) for MIG, LIG and EWS is 1:2:3 having sizes of 55, 35 and 25 sq.m respectively. The maximum number of DU which can be accommodated in the plot is _______________ Q.27 Arrange the following in ascending order of width P. Collector Street R. Local Street S. Sub-Arterial Road (A) P, Q, S, R Q.28 (B) R, P, S, Q (C) Q, S, R, P (D) Q, S, P, R Out of the following, the maximum points in the LEED (New construction) rating system can be earned through (A) Sustainable Sites (B) Water Efficiency (D) Energy and Atmosphere E (C) Materials and Resources Which of the following is NOT a mechanism of bond resistance in reinforced concrete? AT Q.29 20 14 ) Q. Arterial Road (A) Chemical adhesion (B) Friction (C) Mechanical interlock (D) Aggregate interlock A neighborhood has 250 units of 80 sq.m each and 200 units of 100 sq.m each. If the mandatory parking requirement is one per 100 sq.m of built space then, the total area(sq.m) required for parking considering 30 percent additional area for circulation is ________________ Q.31 A brick wall 19 cm thick has a thermal conductivity 0.811 W/m C. The outside and inside surface conductance of the wall are 16 W/m2 C and 8 W/m2 C respectively, then the U-value of the wall in W/m2 C is ____________ AR (G Q.30 Q.32 Match the contemporary buildings in Group I with their architects in Group II Group I Group II P. Vitra Design Museum, Basel 1. Adrian Smith Q. Turning Torso, Malm 2. Jean Nouvel R. Burj Khalifa, Dubai 3. Herzog de Meuron S. Tate Modern, London 4. Santiago Calatrava 5. Frank O Gehry (A) P-3, Q-4, R-2, S-5 (C) P-5, Q-3, R-1, S-2 AR (B) P-5, Q-4, R-1, S-3 (D) P-5, Q-3, R-2, S-1 4/9

Formatting page ...
 

GATE 2014 Q.33 ARCHITECTURE & PLANNING - AR From the following cost components of a building construction project which is not a direct cost combination? P. Labour cost Q. Equipment cost R. Material cost S. Establishment cost T. Supervision cost (B) Q and R (C) P and R (D) S and T 20 14 ) (A) P and Q Q.34 A house located in Delhi has 111 m2 of flat terrace area (runoff coefficient = 0.85) and 55 m2 of ground area covered with grass (runoff coefficient = 0.15). If annual average rainfall is 611.8 mm, then rain water harvesting potential (L/year) from runoff will be ______________ Q.35 Match the elements in Group I with the structures in Group II Group I Group II Harmika 1. Dilwara Temple, Mount Abu Q. Sixteen Vidyadevis 2. Sun Temple, Modhera R. Lat pillar 3. Stupa of Sanchi S. Urushringa 4. Lauriya, Nandangarh 5. Great Kailash Temple, Ellora AT E P. (B) P-1, Q-2, R-4, S-3 (C) P-3, Q-5, R-4, S-2 (D) P-3, Q-1, R-4, S-2 (G (A) P-5, Q-1, R-4, S-3 At a site, based on percolation test, the allowable rate of treated sewage application was determined as 65 L/m2/day. The effective depth (m) of a soak pit with a diameter of 2.5 m for the disposal of 1020 L/day of septic tank effluent is ______________ Q.37 Match the AutoCAD command in Group I with their functions in Group II AR Q.36 Group I Group II P. OOPS 1. Creates solid lines Q. RAY 2. Restores an erased drawing R. TRACE 3. Manages customized user interface elements S. CUI 4. Creates semi-infinite line 5. Creates a five sided 3D solid with a sloped face tapering along the X axis (A) P-1, Q-3, R-2, S-5 (C) P-2, Q-1, R-3, S-4 AR (B) P-2, Q-4, R-1, S-3 (D) P-1, Q-2, R-3, S-4 5/9

Formatting page ...
 

GATE 2014 Q.38 ARCHITECTURE & PLANNING - AR Match the bridges in Group I with their structure type in Group II Group I Group II P. Harbour Bridge, Sydney 1. Simply Supported Q. Golden Gate Bridge, San Francisco 2. Cable Stayed R. Howrah Bridge, Kolkata 3. Arch S. Millau Viaduct, Millau 4. Suspension 5. Cantilever (C) P-2, Q-3, R-4, S-5 Q.39 (B) P-5, Q-1, R-4, S-3 (D) P-1, Q-2, R-3, S-4 20 14 ) (A) P-3, Q-4, R-5, S-2 The arithmetic average value of the sound absorption coefficient for a specific material and particular mounting condition for four frequencies is (A) Transmission coefficient (C) Absorption coefficient (B) Noise reduction coefficient (D) Reflection coefficient A single span simply supported reinforced concrete beam (250 mm wide and 480 mm effective depth) is subjected to a concentrated load of 120 kN at its mid-span. Neglecting self-weight of the beam, the nominal shear stress (MPa) at the support section is ______________ Q.41 The optimistic time, the pessimistic time and the most likely time of a job are 6, 13 and 8 days respectively. The variance for this job is _______________ Q.42 A refuse collection system consisting of two chutes is to be provided in a 20 storied residential building with 2 flats/floor (average family size = 5) and with each chute serving one flat on each floor. Average quantity of refuse and its density are 880 g/person/day and 240 kg/m3 respectively. If the cleaning interval is two days, then the minimum size of the refuse container (litre) at the bottom of each chute is _______________ AR (G AT E Q.40 Q.43 Match the features in Group I with their architectural periods in Group II Group I Group II P. Caryatids 1. Roman Q. Hypocaust 2. Gothic R. Pylons 3. Greek S. Lofty Pinnacles 4. Egyptian 5. Romanesque (A) P-1, Q-5, R-4, S-2 (C) P-3, Q-2, R-5, S-4 AR (B) P-5, Q-1, R-3, S-2 (D) P-3, Q-1, R-4, S-2 6/9

Formatting page ...
 

GATE 2014 Q.44 ARCHITECTURE & PLANNING - AR Match the following terminologies in Group I with their descriptions in Group II Group I Group II Pruning 1. Useful in reproducing plants that would not breed true if propagated by seed Q. Topiary 2. A live bud from a desired plant inserted into a host plant R. Grafting 3. Cutting of evergreen shrubs into abstract or geometric shapes S. Budding 4. Trimming and cutting of lawns 5. Selective cutting of plant branches for better growth (A) P-5, Q-3, R-4, S-2 (C) P-3, Q-4, R-1, S-2 20 14 ) P. (B) P-2, Q-3, R-1, S-5 (D) P-5, Q-3, R-1, S-2 In a dance hall the indoor and outdoor temperatures are 28 C and 18 C respectively. There is an internal heat gain of 5 kW and the specific heat of air (on volume basis) is 1300 J/m3 C, then the necessary cross sectional area (m2) of a duct with an air velocity of 2 m/s required for cooling by ventilation is ____________ Q.46 Assuming full compaction, strength of concrete is inversely proportional to (A) Water - cement ratio Q.47 (B) Water - sand ratio (D) Water - plasticiser ratio AT (C) Water - coarse aggregate ratio E Q.45 Match the terms in Group I with their examples in Group II Group I Q. R. 1. Boardwalk, Atlantic City Universal design 2. Minneapolis, USA Promenading 3. Broadway Theatre District, New York Skyway system 4. Pruitt Igoe Housing, St. Louis, Missouri 5. Curitiba, Brazil AR S. Incentive zoning (G P. Group II (A) P-5, Q-3, R-2, S-1 (C) P-3, Q-5, R-4, S-2 Q.48 AR (B) P-4, Q-5, R-1, S-3 (D) P-3, Q-5, R-1, S-2 If yield stress of steel is 415 MPa, then strain in tensile reinforcement at the limit state of collapse shall be at least _____________. For steel, the Young s Modulus, E = 2 X 105 MPa. 7/9

Formatting page ...
 

GATE 2014 Q.49 ARCHITECTURE & PLANNING - AR Match the books in Group I with their authors in Group II Group I Group II P. Architecture Now! 1. Ian Mc Harg Q. Intentions in Architecture 2. Robert Venturi R. Design with Nature 3. Christopher Alexander S. Complexity & Contradictions in Architecture 4. Philip Jodidio 5. Christian Norberg Schulz (C) P-2, Q-3, R-1, S-5 Q.50 (B) P-4, Q-5, R-1, S-2 (D) P-3, Q-1, R-4, S-2 20 14 ) (A) P-2, Q-3, R-4, S-1 Match the common names of the trees in Group I with their botanical names in Group II Group I Group II Gulmohar 1. Q. Palash R. Indian Mahogany S. Banyan 2. 3. Delonix Regia Toona Ciliata 5. Butea Monosperma (B) P-4, Q-5, R-2, S-1 (D) P-3, Q-1, R-5, S-2 AT (C) P-3, Q-5, R-4, S-2 Ficus Benghalensis 4. (A) P-5, Q-3, R-4, S-2 Dalbergia Sissoo E P. A room of internal dimension 4m x 5m x 3.5m (LxBxH) has 20 cm thick walls and two doors of size 1m x 2m. The required area of Damp Proof Course (sq.m) is _____________ Q.52 A load of 30 kN is applied vertically downward at the free end of a cantilever of span 5 m. If the elastic modulus of the cantilever is 30 GPa and the section has a width of 0.3 m and a depth of 0.6 m, then, the elastic deflection (in mm) is ______________ AR (G Q.51 Q.53 Associate the plans in Group I with the options in Group II Group I Group II P. City Development Plan 1. PMGSY Q. Slum Free City Plan 2. JNNURM R. Transport Network Plan 3. RAY S. Disaster Management Plan 4. NDMA 5. RSVY (A) P-2, Q-3, R-1, S-4 (C) P-1, Q-3, R-2, S-5 AR (B) P-2, Q-1, R-5, S-4 (D) P-3, Q-2, R-1, S-4 8/9

Formatting page ...
 

GATE 2014 ARCHITECTURE & PLANNING - AR Q.54 The capacity of a hall is 600 persons and its volume is 3000 cu.m. If an optimum reverberation time of 1.0 second is to be achieved then the required total absorption (m2sabine) is _____________ Q.55 A solid straight steel rod of diameter 100 mm is bent in single curvature into a circular arc by a moment of 50 kNm applied at its ends. If elastic modulus, E, for steel is 2 x 105 MPa, the radius of curvature (mm) of the arc assuming =3.14 is _____________ AR (G AT E 20 14 ) END OF THE QUESTION PAPER AR 9/9

 

  Print intermediate debugging step

Show debugging info


 

Additional Info : Solved GATE exam paper study guide - 2014 : Architecture and Planning Free online question paper
Tags : GATE architecture and planning 2015 model question papers, gate AR papers, India, GATE Exam Question Papers, Free Online Solutions, Answers, Answer Key, Graduate Aptitude Test in Engineering, IIT, IISc, GATE Exam Syllabus, GATE Study Material, GATE Exam Pattern, gate exam papers, gate question papers 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, 1991, past gate papers, gate papers with answers, gate entrance exam engineering, gate previous years papers, gate old papers, gpat.  

© 2010 - 2017 ResPaper. Terms of ServiceContact Us Advertise with us

 

NEW: Save page on Android App
gate chat