
	Trending ▼ ICSE CBSE 10th ISC CBSE 12th CTET GATE UGC NET Vestibulares ResFinder

TOGGLE CLAMPS

12 pages, 0 questions, 0 questions with responses, 0 total responses,

	mohanraj	+Fave Message
	Profile Timeline Uploads

Home > mohanraj >

Formatting page ...

TOGGLE CLAMPS Vertical Handle ....................... 128-130 Horizontal Handle .................. 131-132 Straight Line Action ............... 133-135 Pull Action .............................. 136-138 Accessories .....................................138 General Information HOLDING CAPACITY The holding capacity listed for each clamp refers to the maximum external force that the clamp can safely resist in its locked position without incurring any permanent deformation. For hold down clamps, holding capacity is measured with the spindle as close as possible to the handle, and will be less at the end of the clamping arm. CLAMPING FORCE Clamping force, the amount of force actually applied to the workpiece by closing and locking the clamp, is generally less than the stated holding capacity. This allows the clamp to have ample capacity to resist external machining forces. Actual clamping force depends on many factors including: spindle position, proper spindle height adjustment, type of spindle used, workpiece material, and the clamp s mechanical advantage. In most cases roughly 1/2 of the stated holding capacity can be applied by hand with medium effort. TOGGLE CLAMPS Vertical Handle Toggle Clamps One of the most popular styles of Toggle Clamps Solid bar allows fixed location of spindle by welding bolt retainer at desired position U-Bar allows spindle to be located anywhere on bar length Flanged bases provide optimum holding pressure T-Handles provide greater clearance for machines All clamps include spindle assembly All TE-CO Toggle Clamps are interchangeable with industry standards Vertical Handle Toggle Clamps Part Numbers 34001 and 34003 Bar Opens: 100 Handle Opens: 56 Spindle Type: Bonded Neoprene Spindle Size: #10-24 X 1.38 Part No. A B C D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 34001 34003 3.38 2.41 2.07 2.07 0.73 0.68 0.63 0.63 0.95 0.94 1.00 1.00 1.32 1.32 1.06 1.06 0.17 0.17 0.77 0.81 1.77 ADJUSTABLE ADJUSTABLE FLANGED FLANGED 100 100 STANDARD T-HANDLE Bar Type Base Type Holding Cap. Lbs. Handle Type SOLID ADJUSTABLE ADJUSTABLE SOLID FLANGED FLANGED FLANGED FLANGED 200 200 200 200 STANDARD STANDARD T-HANDLE T-HANDLE Vertical Handle Toggle Clamps Part Numbers 34010, 34006, 34008, 34012 Bar Opens: 100 Handle Opens: 60 Spindle Type: Bonded Neoprene Spindle Size: 1/4-20 X 1.75 Part No. B C D E F G H J K L 34010 34006 34008 34012 128 A 4.01 4.01 3.12 3.03 2.50 2.68 2.68 2.50 0.98 0.95 0.98 0.97 0.51 0.52 0.51 0.56 1.00 1.03 1.03 0.99 0.98 0.98 0.98 0.99 1.50 1.50 1.53 1.48 1.28 1.68 1.70 1.26 0.21 0.20 0.20 0.21 1.08 0.98 - 2.60 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com TOGGLE CLAMPS Vertical Handle Toggle Clamps Part Numbers 34023, 34020, 34022, 34025, 34009 Bar Opens: 100 Handle Opens: 60 Spindle Type: Bonded Neoprene Spindle Size: 5/16-18 X 2.50 PART #34023 PART #34020 PART #34022 PART #34025 Part No. A B C D E F G H J K 34023 34020 34022 34025 34009 5.60 5.88 4.10 5.90 5.58 5.43 4.59 4.60 3.75 4.78 1.25 1.23 1.23 1.26 1.26 0.78 0.75 0.75 0.74 0.75 1.25 1.25 1.25 1.25 1.25 1.38 1.38 1.38 1.37 1.38 1.77 1.82 1.77 1.80 1.76 3.75 2.85 2.86 2.24 3.40 0.27 0.27 0.27 0.27 0.27 2.79 2.05 2.10 - L Bar Type LONG ADJUSTABLE ADJUSTABLE 3.86 ADJUSTABLE SOLID LONG SOLID Base Type Holding Cap. Lbs. Handle Type FLANGED FLANGED FLANGED FLANGED FLANGED 500 200 375 375 500 STANDARD STANDARD T-HANDLE STANDARD STANDARD Vertical Handle Toggle Clamps Part Numbers 34030, 34015, 34035 Bar Opens: 105 Handle Opens: 58 Spindle Type: Bonded Neoprene Spindle Size: 3/8-16 X 3.50 Part No. A B C D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 34030 34015 34035 7.96 5.60 7.89 5.65 5.50 5.59 1.66 1.62 1.26 1.25 1.25 1.25 1.80 1.77 1.81 1.94 1.94 1.94 2.55 2.50 2.56 3.56 3.56 3.53 0.31 0.31 0.31 2.31 2.40 - 5.13 - ADJUSTABLE ADJUSTABLE SOLID FLANGED FLANGED FLANGED 600 600 750 STANDARD T-HANDLE STANDARD 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com 129 TOGGLE CLAMPS Vertical Handle Toggle Clamps Part Numbers 34040, 34041 Bar Opens: 135 Handle Opens: 70 Spindle Type: Hex Head Spindle Size: 1/2-13 X 3.00 Part No. A B C D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 34040 34041 8.81 8.81 6.89 7.12 1.95 2.00 1.25 1.26 1.77 1.78 2.00 2.01 2.56 2.56 4.87 4.95 0.35 0.35 2.98 - - ADJUSTABLE SOLID FLANGED FLANGED 1000 1000 STANDARD STANDARD Vertical Handle Toggle Clamps Part Numbers 34050, 34029 Bar Opens: 140 Handle Opens: 60 Spindle Type: Hex Head Spindle Size: 1/2-13 X 4.50 Part No. A B 34050 11.87 9.00 34029 11.83 8.97 130 C D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 3.08 3.22 2.00 2.00 2.75 2.75 2.99 2.99 3.75 3.75 5.99 5.98 0.48 0.48 4.33 - - ADJUSTABLE SOLID FLANGED FLANGED 1200 1200 STANDARD STANDARD 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com TOGGLE CLAMPS Horizontal Handle Toggle Clamps U-Bar allows the spindle to be located anywhere on bar length All clamps supplied with spindle assembly Handles stay clear of the workpiece while machining Flanged bases provide optimum holding pressure All TE-CO Toggle Clamps are interchangeable with industry standards Horizontal Handle Toggle Clamps Part Numbers 34105, 34101 Bar Opens: 90 Handle Opens: 80 Spindle Type: Nylon Hex Head Spindle Size: #8-32 X .75 Part No. A B C D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 34105 34101 0.70 0.73 3.10 3.24 0.34 0.42 0.42 0.41 0.65 0.64 0.95 0.95 0.98 0.99 0.78 0.87 0.17 0.17 0.48 - - ADJUSTABLE SOLID BAR FLANGED FLANGED 60 60 STANDARD STANDARD Horizontal Handle Toggle Clamps Part Numbers 34107 Bar Opens: 85 Handle Opens: 60 Spindle Type: Bonded Neoprene Spindle Size: 1/4-20 X 2.13 Part No. A B C D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 34107 1.53 5.90 1.00 0.98 0.83 1.46 1.34 2.27 0.21 - - SOLID BAR FLANGED 200 STANDARD 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com 131 TOGGLE CLAMPS Horizontal Handle Toggle Clamps Part Numbers 34113, 34114, 34115 Bar Opens: 90 Handle Opens: 170 Spindle Type: Bonded Neoprene Spindle Size: #10-24 X 1.38 (34113) 5/16-18 X 2.50 (34114) 3/8-16 X 3.50 (34115) Part No. A B C D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 34113 34114 34115 1.47 2.49 3.73 2.30 3.68 5.33 0.65 0.89 1.31 0.53 0.91 1.38 0.66 1.17 1.50 1.03 1.72 2.52 1.03 1.82 2.52 1.26 1.93 2.81 0.17 0.28 0.31 0.44 0.77 1.32 1.32 2.01 2.48 ADJUSTABLE BAR ADJUSTABLE BAR ADJUSTABLE BAR FLANGED FLANGED FLANGED 150 350 750 STANDARD STANDARD STANDARD Horizontal Handle Toggle Clamps Part Numbers 34120 Bar Opens: 90 Handle Opens: 65 Spindle Type: Bonded Neoprene Spindle Size: 5/16-18 X 3.00 Part No. A B C D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 34120 1.96 6.88 1.31 0.99 0.89 1.51 1.36 2.91 0.28 1.31 - ADJUSTABLE BAR FLANGED 500 STANDARD Horizontal Handle Toggle Clamps Part Numbers 34130 Bar Opens: 85 Handle Opens: 50 Spindle Type: Bonded Neoprene Spindle Size: 3/8-16 X 3.50 Part No. 34130 132 A B C 2.55 10.40 1.73 D E F G H J K L Bar Type Base Type Holding Cap. Lbs. Handle Type 1.62 1.60 2.25 2.23 4.29 0.31 2.74 - ADJUSTABLE BAR FLANGED 750 STANDARD 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com TOGGLE CLAMPS Straight Line Action Clamps Clamps provide push/pull forces Tapped plunger allow use of a variety of spindles and attachments All clamps supplied with spindle assembly All TE-CO Toggle Clamps are interchangeable with industry standards Straight Line Action Clamps Part Numbers 34300, 34301, 34302 Spindle Type: Hex Head Spindle Size: 1/4-20 X .63 (34300) 5/16-18 X 1.00 (34301) 3/8-16 X 1.25 (34302) Part No. A B C D E F G H J K L Mounting Type Handle Type Holding Cap. Lbs. Plunger Travel 34300 34301 34302 3.06 4.16 5.43 2.67 4.26 6.73 0.48 0.63 0.88 1.03 1.28 1.86 - 0.37 0.43 0.63 - 0.81 1.57 2.80 0.58 0.73 1.05 0.26 0.25 0.35 0.94 1.17 1.59 THROUGH HOLE THROUGH HOLE THROUGH HOLE STANDARD STANDARD STANDARD 200 300 700 .75 1.50 2.63 Straight Line Action Clamps Part Numbers 34305, 34303 Spindle Type: Hex Head Spindle Size: #8-32 X.50DP (34305) 1/4-20 X .50LG (34303) PART #34305 PART #34303 Part No. A B C D E F G H 34303 34305 1.59 1.57 2.85 2.67 0.57 0.52 0.63 0.63 0.61 0.61 1.32 1.31 1.07 1.07 1.53 1.35 J M Mounting Type 0.17 1/4-20 STANDARD 0.17 0.25 STANDARD Handle Type Holding Cap. Lbs. Plunger Travel Spindle Thread STANDARD STANDARD 100 100 .63 .63 ExTERNAL INTERNAL 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com 133 TOGGLE CLAMPS Straight Line Action Clamps Part Number 34306 Spindle Type: Hex Head Spindle Size: 5/16-18 X 1.00 Part No. A B C D E F G H J M Mounting Type Handle Type Holding Cap. Lbs. Plunger Travel Spindle Thread 34306 4.10 5.00 0.85 1.57 1.33 3.27 1.95 1.71 0.26 0.47 FLANGE STANDARD 300 1.25 INTERNAL Straight Line Action Clamps Part Number 34310 Spindle Type: Hex Head Spindle Size: 5/16-18 X 1.00 Part No. A B C D E F G H J M Mounting Type Handle Type Holding Cap. Lbs. Plunger Travel Spindle Thread 34310 3.14 5.45 0.98 1.38 1.64 3.55 2.22 1.90 0.22 0.47 FLANGE STANDARD 300 1.25 INTERNAL Straight Line Action Clamps Part Number 34320 Spindle Type: Hex Head Spindle Size: 3/8-16 X 1.25 Part No. B C D E F G H J M Mounting Type Handle Type Holding Cap. Lbs. Plunger Travel Spindle Thread 34320 134 A 5.04 6.82 1.75 1.63 1.58 2.25 2.20 4.23 0.34 0.62 FLANGE STANDARD 800 1.63 INTERNAL 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com TOGGLE CLAMPS Straight Line Action Clamps Part Numbers 34340, 34350, 34360, 34309, 34308 Spindle Type: Hex Head Spindle Size: 5/16-18 X 1.00 (34340) 3/8-16 X 1.25 (34350, 34360) 1/2-13 X 2.00 (34309, 34308) Part No. A B C D E F G H J M Mounting Type Handle Type Holding Cap. Lbs. Plunger Travel Spindle Thread 34340 34350 34360 34309 34308 3.34 4.19 4.95 4.75 6.93 3.64 6.41 9.39 6.41 9.38 0.98 1.25 1.78 1.25 1.83 1.44 1.62 1.99 1.60 2.00 1.32 1.63 2.00 1.62 2.02 2.30 2.33 2.89 2.33 2.85 1.85 2.25 2.48 2.25 2.82 2.03 3.13 5.00 3.14 5.75 0.23 0.33 0.34 0.33 0.35 0.43 0.63 0.70 0.62 0.70 FLANGE FLANGE FLANGE FLANGE FLANGE 45 degrees 45 degrees 45 degrees 45 degrees 45 degrees 600 850 1500 850 1500 1.25 1.65 2.36 1.25 2.36 INTERNAL INTERNAL INTERNAL INTERNAL INTERNAL Straight Line Action Clamps Part Numbers 34304, 34330 Spindle Type: Hex Head Spindle Size: 5/16-18 X 1.00 (34304) 3/8-16 X 1.25 (34330) Part No. A B C D E F G H J M Mounting Type Handle Type Holding Cap. Lbs. Plunger Travel Spindle Thread 34304 34330 3.28 2.93 6.10 7.06 0.68 0.88 1.38 1.39 1.62 1.63 4.30 5.25 2.18 2.24 1.86 1.82 0.28 0.35 0.51 0.63 FLANGE FLANGE STANDARD STANDARD 800 2500 1.63 2.00 INTERNAL INTERNAL 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com 135 TOGGLE CLAMPS Pull Action Clamps Ideal for latching, locking, or fastening doors, fixtures, pressure vessels, covers and hatches on storage tanks All TE-CO Toggle Clamps are interchangeable with industry standards Pull Action Clamps Part Numbers 34420, 34425, 34430 Spindle Type: U-Hook Drawing Movement: 1.81 (34420) 1.75 (34425) 2.50 (34430) Hook Size: M4 (34420) M5 (34425) M8 (34430) Flanged Base Standard Handle Part No. A B C D E F G H J K L N O Q Min Q Max Holding Capacity 34420 34425 34430 1.31 1.91 2.75 4.18 6.56 8.48 0.40 0.48 0.76 0.62 0.78 1.62 0.76 1.25 1.44 1.03 1.52 2.39 1.12 1.75 2.12 0.78 1.01 1.17 0.17 0.28 0.34 0.80 0.79 1.17 0.55 1.00 0.31 0.13 0.17 1.75 0.44 0.50 0.83 1.84 2.53 4.39 2.57 3.69 5.37 360 700 2000 Pull Action Clamps Part Numbers 34409, 34411 Spindle Type: U-Hook Flanged Base Drawing Movement: Standard Handle 3.50 (34409) PART #34409 2.19 (34411) Hook Size: M10 (34409) M12 (34411) Part No. 34409 34411 136 A B C 3.96 11.39 1.37 3.63 10.18 1.37 PART #34411 D E F G H J K L N O Q Min Q Max Holding Capacity 2.24 2.24 2.28 2.26 3.43 3.43 3.21 3.17 2.32 2.32 0.41 0.41 1.71 2.06 3.14 3.14 0.39 0.46 1.17 1.08 6.22 6.13 7.21 7.25 4000 7500 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com TOGGLE CLAMPS Pull Action Clamps Part Numbers 34404, 34406, 34407 Spindle Type: U-Hook Drawing Movement: 1.53 (34404) 2.00 (34406) 2.50 (34407) Hook Size: M4 (34404) M6 (34406) M8 (34407) Flanged Base Standard Handle Part No. A B C D E F G H J K L M N O P Q Min Q Max Holding Capacity 34404 34406 34407 2.22 2.86 3.60 3.15 4.71 5.25 0.57 0.81 1.06 0.51 0.75 1.25 0.87 1.02 1.47 1.02 1.30 1.86 1.39 1.56 2.11 1.00 1.50 2.13 0.21 0.28 0.35 0.86 1.06 1.74 0.54 0.67 1.19 3.43 4.36 5.75 0.12 0.23 0.31 0.20 0.25 0.50 0.43 0.64 0.79 0.54 0.54 2.14 1.20 1.50 2.11 500 1000 2000 Pull Action Clamps Part Numbers 34401, 34408, 34405 Spindle Type: U-Hook Drawing Movement: 1.53 (34401) 2.00 (34408) 2.50 (34405) Hook Size: M4 (34401) M6 (34408) M8 (34405) Part No. 34401 34408 34405 A B C 1.45 8.33 0.74 2.17 11.46 0.96 2.62 13.80 1.82 Flanged Base Standard Handle D E F G J N Q Min Q Holding Max Capacity 0.94 1.25 1.13 1.44 1.97 2.49 1.50 1.86 2.13 1.99 2.61 3.30 0.24 0.35 0.41 0.30 0.39 0.47 1.53 2.70 2.75 3.11 3.44 3.60 375 750 1000 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com 137 TOGGLE CLAMPS Pull Action Clamps Part Numbers 34403 Drawing Movement: 4.00 Bar Type: Fixed Hook Flanged Base Standard Handle Part No. A B D E F G J K N O Holding Capacity 34403 1.88 8.40 0.75 1.22 1.38 1.72 0.28 0.60 0.12 1.59 375 ACCESSORIES Spindle Assemblies Spindle Assemblies Part No. D G L L1 Part No. D G L L1 34541 34561 34540 0.63 0.43 0.47 3/8-16 1/4-20 5/16-18 3.62 2.72 3.48 3.22 2.43 3.11 34533 34530 34532 0.88 0.59 0.49 3/8-16 1/4-20 5/16-18 3.44 2.17 3.05 2.60 1.59 2.31 Spindle Assemblies Part No. G L L1 34514 34515 34560 34512 138 D 0.55 0.74 0.43 0.49 3/8-16 1/2-13 1/4-20 5/16-18 3.23 3.31 1.65 2.71 3.00 3.00 1.50 2.50 Weldable Bolt Retainers Part No. A B F1 D 34550 34551 34552 1.20 1.47 1.70 0.64 0.74 1.19 0.25 0.33 0.38 0.32 0.41 0.67 937-836-0961 800-543-4071 Fax: 937-832-1274 www.te-co.com E-Mail: info@te-co.com

Formatting page ...

mohanraj chat

Horizontal lines at:
Guest Horizontal lines at:
AutoRM Data:
Box geometries: